Product Features:
1. Automatic system voltage identification
2. Charging program options for sealed, GEL and flooded lead-acid batteries and lithium batteries are available.
3. An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charge to the battery periodically or when over discharged can effectively prevent the battery from non-equalization and sulfuration, thus extending the battery's service life (with the exception of GEL and lithium batteries).
4. With temperature compensation employed, charging parameters can be automatically adjusted (with the exception of lithium batteries).
5. A wide range of load working modes facilitate the product's application to different types of street lights and monitoring devices.
6. The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
7. By virtue of an advanced load starting method, large-capacitance loads can be started smoothly.
8. A range of parameter settings and power-down saving functions are available, thus requiring no repeated setting.
Application
Solar Station System
Solar power station systems are typically used for regional centralized power supply, such as village, island, fields monitoring and so on. Also the power level range is between kilowatts to hundreds kilowatts.
Solar Home System
Solar home system are typically used for home photovoltaic power generation system, to solve electricity demand of none power or unstable power region. Also the power level rage is between hundred watts to kilowatts.
Solar RVs/Vessels System
Solar RVs/Vessels system are typically used for reducing the RVs and the vessels electricity cost, by setting up solar system to assist gasoline/diesel power generator.
Solar Street lights System
Solar Street lights System are typically used for street lightning of cities, villages, the intelligent streetlight system will remote monitoring all street lamps to reduce the operation and maintenance costs of system.
Hybrid Energy System
The Hybrid energy system contains solar, wind, diesel and city electricity energy system. The system will meet the load demand of electricity in villages, islands, and telecom stations to reduce the system cost and improve the replenishment ratio of system.
Product Parameters:
| Model | HP2430N/2440N | Remarks |
| Rated current | 30A/40A | |
| System voltage | Automatic recognition of 12V/24V | Default: automatic identification |
| | Manual setup | |
| Rated power | 12V/450W 24V/900W | 12V/600W 24V/1200W | |
| No-load loss | < 22mA/12V;< 16mA/24V | The lower the system voltage, the smaller the no-load loss. |
| Max. Solar energy input voltage | <55V | |
| Max. voltage at the battery end | <34V | |
| Battery type | Parameters | |
| | Flooded FLD | Sealed SLD | GEL GEL | Lithium LI | Default SLD |
| Temperature compensation | -3.0mV/℃/2V | - | |
| Light control voltage | Light control on 5V, light control off 6 V (light control on plus 1 V) | ×1/12V; ×2/24V; |
| Light control judgment time | 10 minutes | |
| USB function | Yes | |
| 232 Serial port communication function | optional | |
| Over temperature protection | When temperature is above 60℃,charging function is turned off, and the function is recovered when temperature is below 55℃; When temperature is above 70℃,load starting function is turned off, and the function is recovered when temperature is below 60℃ | |
| IP protection rating | IP30 | |
| Protection functions | Battery plate reverse connection protection, a battery reverse connection protection, charging battery board short circuit protection, charging the battery open circuit protection, charging over current protection, overload protection, load short-circuit protection controller and over temperature protection. | |
